| Concrete vibrators | Ceiling Grinders | Flexible Shafts | Rebar Shakers |

Flexible Shafts for Concrete Vibrators

Oztec Concrete Vibrator Header

HEADS

 

RubberHeadTM

 

Rebar ShakerTM

 

Rebar ShakerTM

Heavy Duty

 

Steel Heads

 

Pencil Heads

 

Heads for Tilt-Up

 

Rubber Tips

 

POWER UNITS

 

Electric Power Units

 

Gas Power Units

 

Back Packs

 

SHAFTS

 

Flexible shafts

 

Adapter Couplings

 

Lubricants

 

INFORMATION

 

Selection Chart

 

Tips & Suggestions

 

GRINDERS

 

Ceiling Grinders

 
 

Oztec Quick Disconnect System

 

 

 

Concrete Vibrator Flexible Shaft Adapter

 

 

 

 

 

 

Concrete Vibrator Flexible Shaft Lubricant

 

 

 

Selection Chart

 

Click here for the selection chart to match the proper combination of power unit,  shaft and vibrator head.

 

     
Flexible Shafts
Concrete Vibrator Flexible Shaft
When transmitting power from the power source to the vibrating head, select one of Oztec's flexible shafts. Oztec Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner.

This construction makes Oztec Flexible Shafts rigid enough for driving into the stiffest concrete without kinking yet limber and non-slip for easy and effective handling.

Oztec Flexible Shafts are interchangeable on all Oztec power units, are reversible (doubling their service life), and come supplied with "quick change" adapters.

(Click here for Head, Shaft and Power Unit selection chart)

Quick Disconnect Feature 
Oztec's "Quick Disconnect" feature, allows shaft removal from the power unit with the twist of a lever. The lightweight and bearing-less coupling allows the job to be done in seconds without any tools. This fitting will not rust or seize.

 

Standard lengths (in feet): 2, 5, 7, 10, 12, 14, 16, 18 and 21.

All dimensions shown are nominal, actual dimensions may vary. Call for details.

Oztec Flexible Shafts can be coupled to 42 feet using a ball bearing shaft connector #6725A1.

Oztec Shafts have been successfully coupled to 65 feet. Custom lengths are available. For either situation, call Oztec for details at: 1-800-533-9055.

Pencil Shafts for Pencil Head vibrators are available in 3, 6, 9, 11, 15 and 20 foot lengths.
(Pencil Shafts cannot be coupled together, but can be lengthened, by coupling to a standard shaft with coupling P/N: 6725A1).

Flexible Shaft Adapters 
Taking advantage of Oztec's quality doesn't mean a major reinvestment to replace all your existing equipment. Oztec Supplies motors, shafts and heads (steel only) that are interchangeable with most other makes. Oztec makes various style core and casing adapters which allow other manufacturers flexible shafts and heads to be used with Oztec motors or other motors with Oztec flexible shafts and heads.

Flexible shaft adapters for use with other manufacturers' equipment.
Call 1-800-533-9055 for specifications.

Flexi-Lube 
Specially formulated shaft lubricant designed to increase the performance and life of any flexible shaft.

Home | Oztec Products | The Company | Contact Us | What's New | PDF Catalog | Trade Shows | Other Oztec Products

Oztec Industries, Inc. 2010  |  Privacy